Pool Floc Instructions

Pool Floc Instructions

1.    Turn the pump off

2.    Put the filter valve to the recirculate/whirlpool setting

3.    Turn the pump back on

4.    Add floc into the skimmer

5.    Allow to circulate for 2 hrs

6.    Turn the pump off

7.    Put the filter valve back on the filter setting

8.    Leave the pool off for 12-48 hrs or until bottom is visible and if it not visible by 48 hrs turn the pump back on and bring a water sample to the store.

9.    Vacuum the pool on the waste/drain setting

•    Be sure to over fill the pool before vacuuming because you will lose water during the vacuuming process

•    Be sure retest the pool water after vacuuming