Pool Floc Instructions

Home » Helpful Tips » Pool Floc Instructions

Pool Floc Instructions

1. Turn the pump off

2. Put the filter valve to the recirculate/whirlpool setting

3. Turn the pump back on

4. Add floc into the skimmer

5. Allow to circulate for 2 hrs

6. Turn the pump off

7. Put the filter valve back on the filter setting

8. Leave the pool off for 12-48 hrs or until bottom is visible and if it not visible by 48 hrs turn the pump back on and bring a water sample to the store.

9. Vacuum the pool on the waste/drain setting

• Be sure to over fill the pool before vacuuming because you will lose water during the vacuuming process

• Be sure retest the pool water after vacuuming